The following chart is a general guide to assist you in finding the right operator for your gate.
Please keep in mind that the material and structure of each gate, the location and climate where the gate is installed, create a unique situation particular to each gate operator application. Consult your GTO/PRO® Sales Manager for more details.
| Gate Type |
Weight and length (per leaf) |
Frequency of use |
Gate Operator |
Power Requirements |
| My Gate is a SWING Gate that does not exceed: |
350 lbs and 12 ft. |
PRO lightweight |
PRO SW-1500 |
DC Solar Compatible |
| 500 lbs and 16 ft. |
PRO moderate |
PRO SW-2500 |
DC / Solar Compatible |
| 650 lbs and 16 ft |
moderate usage |
PRO SW-3000XL |
DC / Solar Compatible |
| 1000 lbs and 20 ft |
moderate to heavy |
PRO SW-4000XL |
DC / Solar Compatible |
| 1000 lbs and 20 ft |
heavy duty usage |
PRO SW-5000 |
AC / Continuous Duty |
| 1800 lbs and 20 ft |
heavy duty usage |
PRO SW-6000 |
AC / Continuous Duty |
| My Gate is a SLIDE Gate that does not exceed: |
500 lbs and 30 ft |
light to moderate |
PRO SL-1000B |
DC / Solar Compatible |
| 1000 lbs and 30 ft |
moderate to heavy |
PRO SL-2000B |
DC / Solar Compatible |
| 1800 lbs and 60 ft |
heavy duty usage |
PRO SL-5000 |
AC / Continuous Duty |
| 2500 lbs and 60 ft |
heavy duty usage |
PRO SL-6000 |
AC / Continuous Duty |
|
Back
Where can I purchase a GTO/PRO® Automatic Gate Operator?
GTO/PRO® is the best buy in its class. Keep in mind, every gate application is unique to that gate and usage. The price of the gate opener system will vary depending upon the number of accessories and the type/model of gate opener you need.
Our dealers and retailers can give you pricing on the gate opener system that is best for you.
We do not sell factory direct, therefore we do not quote pricing. However, we are happy to refer you to your nearest dealer or retailer for pricing information on our affordable gate opener systems. You may purchase accessories only from an authorized GTO/PRO® dealer, if they do not normally stock an item you need to contact us for assistance and for help locating a GTO/PRO® dealer near to you.
Back
Do GTO/PRO® gate operators have soft start and soft start features?
Yes, the PRO SW-3000 and PRO SW-4000 gate operator series, have this advanced feature. This will prolong the life of gate hardware and gate operators.
How does the gate close?
GTO/PRO® Automatic Gate Operators are fully capable of adjustable programming to allow for the gate to close automatically after reaching its fully opened position. If you wish to have the gate close sooner than that temporarily, push the button on the GTO/PRO® entry transmitter to activate the gate.
What happens if the gate hits something while it is in motion?
The GTO/PRO® Automatic Gate Operators have a built-in safety obstruction sensor that once activated, causes the gate to stop and reverse its direction (much like a garage door opener). The sensitivity for this safety feature is fully adjustable.
What if I DON'T want my GTO/PRO® automatic gate operator to close automatically?
To disable this feature, open the control box and turn the dial until the 'auto close' is off.
Back
Will GTO's automatic gate operator hold the gate tightly closed?
Depending on the length and type of gate, there is a possibility that the end of the gate can flex enough to allow a person or an animal to enter. For maximum stability and additional security, the GTO/PRO® Automatic Gate Lock should be installed.
Can I lock my gate?
Yes. GTO/PRO®'s Automatic Gate Lock will lock the gate and has a manual key as well .
Do you carry an automatic lock that is for pedestrians only?
Yes. GTO/PRO® has a product that will do just that. It is called the Bulldog Pedestrian Gate Lock. It does not require a gate operator to lock a "walk-thru" gate. It can utilize additional accessories such as digital keypads for added security. It is wonderful for areas around pools or daycare centers that need to restrict pedestrian traffic.
Can I manually open the gate after I have installed my GTO/PRO® automatic gate operator?
Yes. All low voltage systems such as the PRO SW-3000 and PRO SW-4000 series gate operators, in which the opener arm is mounted with clevis pins. By removing the pin and clip at either end, the operator can be removed and the gate manually opened.
Can anyone remove my GTO/PRO® automatic gate operator by removing the clevis pins?
Yes. However, to avoid theft, add the Pin Lock accessory on the front end of the swing gate operator to ensure that only the homeowner can unlock and release the opener. For adding pin locks to slide gates and for more details contact GTO/PRO®.
Back
For all troubleshooting and/or installation questions please contact our Techincal Service Department. Please be prepared to give your name, location, make and model of product, when and where purchased, and the nature of your concern.
You may contact technical service or call toll free (800) 543-1236 (USA) or local (850) 575-4144.
Our Technical Service hours are Monday-Friday 8:00 am- 7:00 pm (EST)
Back
Can I open my garage door opener with my GTO/PRO® entry transmitter?
Garage door openers use a different radio frequency than the GTO/PRO® Automatic Gate Opener does. If you want your GTO/PRO® entry transmitter to activate both, you can purchase a special GTO/PRO® garage door receiver (special order) The GTO garage door receiver has the same frequency as the GTO/PRO® Automatic Gate Operator. If your gate and garage are within close range of each other and you wish to have one transmitter to do it all, then you can purchase a two or three button GTO entry transmitter (special order) that will operate the openers separately.
CanI open my GTO/PRO® automatic gate operator from my house with my GTO/PRO® transmitter?
The normal operating range of the GTO/PRO® entry transmitter is 50 ft. to 100 ft. However, because it uses a radio frequency and is subject to interference by weather conditions, topography, outside interference, etc., the actual range may vary. If your house is within 1000 ft. of your gate, you can place a second set of low voltage wires in the ground at the same time you are running wire for the transformer and connect it to an unlit Push Button inside the house. At the control box simply connect the wires to the accessory terminal block.
Can anyone with a GTO/PRO® transmitter be able to open my gate?
Not if you personalize your transmitter code. Every GTO/PRO® entry transmitter comes with identical factory settings, but you can personalize your code by repositioning the dip switches inside the GTO/PRO® entry transmitter.
Can anyone open my GTO/PRO® gate operator without my GTO entry transmitter?
GTO/PRO® offers a weatherproof Digital Keypad accessory (for wired or wireless applications) which can be mounted on a post near the gate. The keypad can be programmed with up to 15 different entry codes for use by family members, delivery personnel, employees, etc. An additional security feature is the ability to change only one code at a time. For example, you can give a delivery person an entry code and then that particular code can be changed or eliminated after the delivery, without affecting the other codes.
Back
GTO/PRO®'s Automatic Gate Openers are currently in use from the Arctic to the Amazon. Because of the battery's design, extreme cold may cause it to operate a little slower than under normal conditions, and may cause it to malfunction. Therefore, we recommend an optional heater in extreme cold.
Does lightning affect the GTO/PRO® automatic gate opener?
No electrical device can withstand a direct lightning hit. However, GTO/PRO® Automatic Gate Operators have built-in ground paths on the control board designed to diffuse mild static charges created by lightning.
Back
Just how are GTO/PRO®'s automatic gate operators powered?
All low voltage (DC) GTO/PRO® automatic gate operators are operated by a 12 volt, 7.0 amp-hour battery which also provides battery backup during a power outage.
How many times will the GTO/PRO® automatic gate operator activate during a power outage?
On the average, a fully charged 12 volt, 7.0 amp-hour battery will provide fifty (50) cycles during a power outage. The number of cycles may vary depending on factors such as the type and size of gate, number of added accessories, and weather conditions.
Can you install more than one battery into the control box?
Yes, the PRO SW-3000XL and PRO SW-4000XL have larger control boxes and are prewired for the optional second battery. This is especially important for solar applications for increased backup power supply.
Just how are GTO/PRO®'s batteries charged?
Each of GTO/PRO®'s (DC powered) Automatic Gate Openers comes with a transformer that plugs into any 110/120 electrical outlet and provides a trickle charge to the battery. The transformer is connected to the control box with up to 1000 ft. of GTO's 16 gauge, multi-stranded, dual conductor, direct burial, low voltage wire (not provided). If there is not a standard outlet within 1000 ft. of the control box, the battery charge can be maintained with optional solar panel(s). If an outlet is located outside, the transformer can be placed inside a weatherproof electrical box and connected to the control box with GTO low voltage wire.
Back |
